Before applying, sweep or brush to remove debris. Surface should be clean and free of grease and oil. Water applied to the surface should soak in easily. If efflorescence is present, wash surface with a dilute solution of muriatic acid and water, then rinse with clear water and allow to dry fully before applying Colour Crete.

Test

Prior to application, Colour Crete should be tested to determine satisfaction with final appearance. Test on a small, inconspicuous area and allow to dry fully.  Wet surfaces appear darker. Final appearance should be evaluated after product dries.

Colour Crete should be applied liberally using a brush, roller, or pump sprayer. Do not allow it to pool on horizontal surfaces. For a more uniform appearance, brush excess material into more porous areas until Colour Crete has fully penetrated the treated surface. To create a darker tone, allow up to 1 hour dry time before applying a second coat. Colour Crete can be applied in one or two coats. Coverage will vary between 60 – 200 sq. ft./gallon, depending on the porosity of the concrete and the condition of the surface (rough surfaces use more stain than smooth ones).

SPECIAL EFFECTS

You can achieve special effects by blending tints of Colour Crete, wet-on-wet, for desired results. Allow previous coat to begin curing (15 – 20 min.). Colors will not blend if previous coat is fully cured. No thinning is necessary; Colour Crete should be applied as supplied.

Concrete can cure for up to six months after the initial pour. During this time, moisture is released as the concrete densifies. Allow at least 30 days for moisture to evolve and surface to appear uniform. Excess moisture at the time of application will effect penetration of the stain as well as the consistency of the final effect.

Colour Crete is user-friendly and environmentally safe, meeting all U.S. and Canadian air quality regulations, while offering ease of clean up with warm water (it’s best to clean applicators before product dries). Colour Crete does not contain hazardous raw materials and is considered to be a “low VOC” compliant concrete stain. Please use as directed, and as with all chemicals, keep out of reach of children. Do not ingest. DO NOT FREEZE! If freezing occurs, dispose of remaining product in accordance with local regulations. Material Safety Data Sheets are available upon request.